Whether you’re going for a more contemporary look on the outside or want to stick with more classic window frames, aluminium windows are a great option. So, why should you go with aluminium frames instead of wood? Also, what are some of the best ways to take care of windows? Get all the info you need right now by reading our comprehensive manual.
The answer lies in the question, “Why aluminium windows?”
Aluminum window frames have many advantages.
Now, you may be wondering why you should go with aluminium instead of vinyl windows. Consider the following advantages of aluminium windows before making a final choice:
- Sightlines that don’t break up or look out of place are a major selling point for aluminium windows. Sightlines in windows refer to the exposed parts of the window, such as the frame and the bars that hold the panes together.
- Long-lasting; these panes of glass have been shown to withstand significant amounts of time in spite of exposure to moisture and stress from corrosion and bending.
- Lightweight – not only do they not add too much weight, but they can also provide a variety of aesthetic options for the exterior of your home.
One of the ways in which an aluminium window can help make a house more eco-friendly is that it is 100 percent recyclable.
These windows are also thermally efficient, which means they prevent heat loss.
- Low maintenance – aluminium windows are almost completely maintenance free. Learn how to properly clean your aluminium windows later in this guide.
What is the average lifespan of aluminium frames and sash?
Aluminium window frames are constructed to last for 15–20 years with minimal care. This lifespan can be increased to 30–40 years if you are extremely careful and maintain your windows (by, for example, cleaning them frequently).
Taking Care of Aluminium Windows
Aluminum frames and sashes require almost no upkeep beyond the occasional wiping down, making them a popular choice among homeowners. In general, you should clean your aluminium windows every few months.
How to clean aluminium windows properly
To clean the frames, simply rinse them in warm water with a mild detergent and wipe them down with a soft, nonabrasive cloth. To thoroughly clean a window, begin at the top and work your way down. Keep in mind that dirt and debris can accumulate over time, affecting window drainage, even in inaccessible areas. Use a gentle cloth to dry. Are you prepared to go out and buy some aluminium panes for your home? Make your selection from our large inventory, or browse our wide variety of Reynears Aluminium Windows. Alternatively, get in touch or pop down to our Solihull showroom today.
Modifying Your UPVC Windows
Figure out how to fine-tune your uPVC panes.
Top-hung windows have hinges mounted at the top of the frame, allowing the sash to open outward and upward.
This top-hung style is common for several reasons, not the least of which is that it provides protection from the elements while still letting in a nice breeze and light.
But if you feel an unwelcome draught around the edges of your window frame, it’s probably time to adjust the screws so you can either raise or lower the sash.
How come uPVC frames and glass break?
A small amount of sagging in an uPVC window is not cause for alarm and can occur for a number of reasons related to ageing. The lack of enough plastic packers is cited as a common cause of these failures by glazing installers.
Plastic packers, also known as plastic spacers, are used to fill the empty space between two objects for the purpose of increasing the stability of the whole. You can get them at any hardware store, and they’ll do wonders for the longevity of your uPVC window.
When an uPVC window breaks, what usually occurs?
Your home’s heat will escape if your uPVC windows don’t seal tightly against the seal that runs along the frame.
It’s a different problem in the summer when insects can get in through the cracks and make your home uninhabitable. Condensation and mould growth along the wall adjacent to the shattered window can also be a result of moisture seeping in from the outside. In addition, if you try to shut it by wrenching it, you’ll only cause more damage. That’s why it pays off in the long run to make sure your uPVC windows are set up correctly.
Fortunately, addressing these typical alterations is simple and cheap.
Windows made of polyvinyl chloride (uPVC) and how to adjust them
Replacement of a window’s hinges entails the following steps:
- Carefully unscrew the hinges along the uPVC frame and lift out the sash.
- Steadily replace the old hinges with new ones and screw them in nice and tightly.
- Open and close the window a few times to check for gaps and ensure the window functions smoothly
